How To Partition A Hard Drive

                    
 Hello Truthloaded technologist am back
again this is step by step way of partitioning a disk.Disk partitioning is to divide the hard drive into multiple logical units. People don’t often choose to partition their hard disks, but it has many benefits. Mainly, by partitioning your disk, you can separate your operating system from your data and thus reduce the chances of your data becoming corrupted.
see steps below⇩
1. Open the Computer Management tool. Open the Start menu. Type “Computer Management” in the search bar of the Start menu and press enter.
2. Select the Disk Management tool. Click on Disk Management on the left side of the window and you should see all of the disks and their partitions on your computer. 
3. Make some space for the new partition. Right-click on the partition you wish to re-size and select the Shrink Volume option.

• Note: There may be a partition named System Reserved. It is not recommended that you alter this partition at all. 

 4.Shrink the drive. Enter the size you wish to shrink your drive to in megabytes (1000 MB = 1GB).      Then click on the Shrink button

• Note: You cannot shrink your volume greater than the amount indicated in the Size of available shrink space in MB section.

5. Create a new volume. You should now see a new unlocated partition in your Disk Management window. Right-click on the unallocated partition and select the New Simple Volume option. 
6. The New Simple Volume Wizard. The New Simple Volume Wizard should popup. Click on the Next button to continue.

7. Enter size of new partition. Enter the amount of memory you wish to allocate for your new partition and click on the Next button.

• Note: You cannot make your new volume larger than the maximum amount of memory available.

8. Give the new volume a letter name or path. Select from the menu, a letter name for your new partition and click on the “Next” button.

9.Settings for the new volume.

• Click on the Format this volume with the following settings:
• For File System, select NTFS
• For Allocation unit size, select Default
• For Volume Label, type the name you wish to give your new drive.
• Click on the Perform a quick format
• Then click on the Next button

10. Create the new volume. Look over your settings and click on the Finish button. 

11. Format the new volume.

• You will get a popup asking you to partition your new drive. Click on the Format disk button.
• A new window will popup. Keep the settings and click on the Start button.
• A warning will popup. Click on the OK button.

 12. Check new volume. If everything was done correctly, you should now see your new drive in the Disk Management window.

Note :backup your data before starting in case of mistakes.